To compensate for different sew conditions, Melco OS also has a Pull Compensation function in the software. It is recommended to check those Pull Compensation settings before continuing below.
Thick Columns Sewing Caps:
1. Update your software to the most recent software version.
2. Check sew Speed. If you are getting a Thick Column issue while sewing on Caps, set the sew speed to 600
6. Change the Operating Software Pull compensation. This setting might need to be adjusted differently for individual machines.
Thick Columns Sewing Flats:
1. Update your software to the most recent software version.
2. Check sew Speed.
6. Check your Feed Adjust.
7. Change the Pull Compensation within the Operating Software. This setting might need to be adjusted differently for individual machines.
8. If the situation remains unresolved, you will need additional technical assistance. Here are the available Melco Technical Support