False Thread Breaks

If your machine has a Thread Break message but the top thread and bobbin thread are tied into the fabric with no sew quality issues, follow the steps below.  Thread Breaks are detected after 5 stitches.

  1. Verify that Enable Bobbin Thread Detection is turned ON.
  2. Update your software to the most recent software version.
  3. Set your Sensitivity to default.
  4. If the situation remains unresolved, you will need additional technical assistance. Here are the available Melco Technical Support options.

    a. Verify if the machine should be getting False Bobbin Breaks.
    b. Follow the steps for Bobbin Break.
Was this article helpful?
0 out of 0 found this helpful