Click Here for Main Menu Keypad Functions
Replacement Shortcut Cards Available on ShopMelco
Basic Operations
|
Manually Feed Thread |
Laser + Up |
|
Jog Hoop Up-Left |
Hoop + Up + Left |
|
Jog Hoop Up-Right |
Hoop + Up + Right |
|
Jog Hoop Down-Left |
Hoop + Down + Left |
|
Jog Hoop Down-Right |
Hoop + Down + Right |
|
Hoop Trace |
Hoop + Trace |
|
Bypass Trim Required |
Adjust + Hoop |
|
Trim Immediate |
Adjust + Color |
|
Speed Up |
Adjust + Up |
|
Speed Down |
Adjust + Down |
|
Change Active Needle Right |
Needlecase + Left |
|
Change Active Needle Left |
Needlecase + Right |
|
Open/Close Grabber |
Adjust + Center |
|
Return to Last Stitch |
Left + Right (or currently, Start) |
|
Retain X/Y Position |
Up + Down |
|
Move to Previous Color |
Needlecase + Down |
|
Move to Next Color |
Needlecase + Up |
|
Move to Previous Trim (EMT16Plus and X) |
Trace + Down |
|
Move to Next Trim (EMT16Plus and X) |
Trace + Up |
|
Reset Color Groups |
Hoop + Needlecase |
|
Laser Alignment Operations |
Laser + Left |
|
Laser Alignment Operations |
Laser + Right |
|
Laser Alignment Operations |
Laser + Center (Send) |
|
Change Focus |
Center (Hold for 3 seconds) |
|
Start Sewing |
Press Start |
|
Begin Inching |
Hold Start |
|
Sew Normal Speed |
Press Start |
|
Stop Sewing |
Press Stop |
|
Pause Trace |
Press Stop while tracing |
|
Return to Origin After Trace |
Press Stop x2 while tracing |
|
Start All |
Adjust + Start |
|
Ungroup |
Trace + Needlecase |
|
Copy X/Y from one to all |
Adjust + Hoop when in Stitch Ready |
| Appliqué Function (EMT16X/EMT16Plus Only) | EMT16Plus requires latest Melco OS |
| Appliqué Hoop Forward | Hold Down Arrow for 3 seconds |
|
Maintenance Functions |
|
|
Feeder Home Minus |
Center + Left |
|
Feeder Home Plus |
Center + Right |
|
Step Next Trim Sequence |
Laser + Down |
|
DSP Tune |
Laser + Adjust |
|
Move Z +0.1° |
Trace + Up |
|
Move Z -0.1° |
Trace + Down |
|
Move Z +1° |
Hoop + Up |
|
Move Z -1° |
Hoop + Down |
|
Move Z +10° |
Hoop + Right |
|
Move Z -10° |
Hoop + Left |
|
Move Z +20° |
Adjust + Right |
|
Move Z to 201.5° |
Frame Forward |
|
Move to head up > Move to next needle > Move Z to 201.5° |
Frame Forward again (after previous command) |
|
Move Z to 180° |
Frame Back |
|
Move to head up > Move to next needle > Move Z to 180° |
Frame Back again (after previous command) |
|
Move Z to 27° (Head Up) |
Adjust + Up |
|
Move Z to 180° (Bottom Center) |
Adjust + Down |
|
Needlecase Left 1 Step |
Trace + Left |
|
Needlecase Right 1 Step |
Trace + Right |
|
Pulse Thread Break Strobe |
Up + Down |
|
Disable Sequin |
Stop + Laser + Frame Back |
|
Toggle S95 Thread Clamp |
Trace + Center |
Determining Machine Type - Beep Test
Illustration of Keypad Functions for EMT16Plus
Trace + Up Move to Next Trim
Trace + Down Move Back a Trim
Needle Case + Up Move to Next Color Change
Needle Case + Down Move Back a Color Change
Documentation on how to turn ON/OFF the Sequin Head (Discontinued Accessory).