Use the following sequence to verify and recover the current stitch position after a thread break:
- Engage E-stop.
- Repair thread break.
- Release E-stop.
- Press the laser button to verify the current stitch position.
- Press the combination “Left Arrow + Right Arrow” buttons:
- If a hoop has been moved during the sewing of a design, pressing this combination will move the hoop back to the position of the most recent stitch to sew.
- This can be used to recover the hoop position if the hoop arms get shifted when the e-stop is engaged. Use this command after disengaging the e-stop.
- Press the laser button to verify the active needle is located at the stitch position you wish to start at… if not frame forward or frame back to the correct position.
Laser
- Press to illuminate the point directly below the active needle.