Here is the complete index of training videos from the Melco Embroidery Machine Education & Training Channel on YouTube to get you started using the Melco EMT16X with the Simplified User Interface of Melco OS software. These videos can all be found in the EMT16X Online Manuals. Alternatively, here are the Advanced Interface Training Videos.
1 - Unpacking
2 - Assembling the Cart
3 - Machine on Cart
4 - Attaching the User Interface Panel and End Caps
5 - Selecting Connections (Simplified User Interface)
6 - Machine Connections Single Source
7 - Machine Connections Multiple Source
8 - Powering Up Machines (Simplified User Interface)
9 - Naming and Sequencing Machines in the Machine List
10 - Upper Threading
11 - Upper Threading without thread in the machine
12 - Bobbin Threading and Tension
13 - Initial Maintenance (Simplified User Interface)
14 - Screen Overview (Simplified User Interface)
15 - Loading a Design (Simplified User Interface)
16 - Colorizing the Thread Cone Display & Setting the Color Sequence
17 - Selecting a Hoop (Simplified User Interface)
18 - Setting Machine Speed (Simplified User Interface)
19 - Setting Acti-Feed settings (Simplified User Interface)
20 - Design Orientation and Position (Simplified User Interface)
21 - Changing to Advanced Interface
22 - Changing to (Simplified User Interface)
23 - Choosing an Appropriate Hoop (Simplified User Interface)
24 - Hooping Technique
25 - Hooping a Shirt
26 - Loading a Garment
27 - Presser Foot Adjust (Simplified User Interface)
28 - Trace and Sew (Simplified User Interface)
29 - Finishing a Garment
30 - Powering Down the Machine (Simplified User Interface)
31 - Anatomy of a Needle
32 - Needle Replacement
33 - Changing A Needle
34 - Backings and Toppings
35 - Thread Types
36 - Needle Types
37 - Selecting Driver (Simplified User Interface)
38 - Selecting a Wide Angle Driver
39 - Attaching the Cap Gauge
40 - Loading a Hooped Cap
41 - Adjusting the Red Wide Angle Driver
42 - Selecting a Cap Frame (Simplified User Interface)
43 - Installing the Wide Angle Driver
44 - Sew Settings for Caps (Simplified User Interface)
45 - Centering a Design on a Cap
46 - Maintaining the Wide Angle Driver
47 - Color Sequence for Appliqué (Simplified User Interface)
48 - Sewing an Appliqué
49 - Rotary Hook Maintenance (Simplified User Interface)
50 - Weekly Maintenance
51 - Monthly Maintenance
52 - Quarterly Maintenance
53 - Feed Roller Maintenance
54 – Centering the Needleplate