Installing the Micro Cylindrical Pocket Clamp


Melco offers the Micro Cylindrical Pocket Clamp in Small, Medium, and Large sizes.

hoop_selection1.png        hoop_selection2.png

Hoop Selections Depend Upon the Driver Used - Red or Graphite


  • Online documentation and video instructions for installing the Red WACF driver are available here.


  • Pocket clamps on XT and XTS machines may use the original hat driver for mounting to the machine. See the document included at the bottom of this page (33297.pdf) for full instructions.


  • Use 3 oz. tear away backing in the pocket clamp to sew dress shirt pockets.


  • There is a special hooping gauge PN:  33292 available for preparing the garments using the pocket clamp.  However, many customers use the hat gauge to prepare the garment pocket.



Was this article helpful?
0 out of 0 found this helpful